Everett, MA · Middlesex County

Chimney Carbon Monoxide Problem in Everett, MA

NFPA 211 Level 1 and camera-scanned Level 2 chimney inspections for annual maintenance, home sales, appliance changes, and post-event evaluations. In the Boston market a standalone Level 1 inspection typically runs $99–$199, while a full camera-scanned Level 2 inspection generally falls between $249 and $549 depending on the number of flues.

Call (781) 653-5644

Every autumn, searches for "chimney carbon monoxide problem" spike across Greater Boston, and every autumn our phone at (781) 653-5644 rings with some version of the same story: the first cold night arrived, someone lit the first fire of the season, and something was clearly wrong. Chimneys have a way of announcing their problems exactly when you need them most. The good news is that most of these problems are well understood, diagnosable in a single visit, and fixable before deep winter sets in — provided you do not wait until December, when every sweep in Massachusetts is booked solid. This article from Upside Down Chimney Sweeps lays out what the issue behind your search typically is, how we confirm it, what the repair involves, and how to time the work sensibly so the fireplace is ready when the cold is.

Few moments expose chimney problems like a home sale. General home inspectors in Massachusetts routinely flag chimneys for specialist evaluation because their scope stops at what is visible, and buyers increasingly commission a Level 2 chimney inspection — the NFPA 211 inspection level specifically prescribed when a property changes hands, which includes a video scan of the flue interior. Sellers get surprised by five-figure findings days before closing; buyers inherit problems a fireplace-lit staging photo concealed. Whether you are buying, selling, or staying put, it is worth understanding that the chimney issue behind your search is exactly the kind of item that surfaces during a transaction. Addressing it on your own timeline, with a contractor you chose, beats negotiating it under deadline pressure with a purchase agreement hanging in the balance.

In Massachusetts, a chimney is not seasonal decoration — it is infrastructure. The heating season here runs from October into April, and many chimneys serve double duty, venting a wood-burning fireplace on one flue and an oil or gas heating appliance on another. That means a chimney problem can compromise not just cozy fires but the system that keeps pipes from freezing in January. It also means the flues get real use: months of thermal cycling, condensation, and byproduct accumulation every single year. A problem that might stay dormant for a decade in a milder climate gets stress-tested here every winter. That is the practical reason Massachusetts homeowners cannot treat chimney symptoms casually — the season that reveals the problem is the same season you can least afford to lose the chimney.

Chimney Inspections (Level 1 & Level 2) in Everett, MA

Our inspections are built to give you evidence, not adjectives. The camera we run up your flue records every tile joint and every inch of liner, and the report you receive pairs those images with plain-English findings, priority rankings, and honest recommendations, including the recommendation to do nothing when nothing is wrong. Homeowners across Everett and the surrounding towns use our reports to negotiate home purchases, satisfy insurance carriers, plan repairs, or simply sleep better in January. If your chimney has never had a documented inspection, or if you are staring down a purchase-and-sale deadline, call (781) 653-5644 and we will fit you in quickly.

A Level 2 is not an upsell; it is what the standard actually requires in specific situations. Per NFPA 211, a Level 2 inspection is called for upon sale or transfer of a property, after any operating malfunction or external event likely to have caused damage, such as a chimney fire, a lightning strike, or a building fire nearby, and whenever you change the way the system is used, including swapping fuel types, relining, or installing a new stove or insert. If you are buying a home in Everett, this matters more than almost anywhere: the region's housing stock is old, and the general home inspection you paid for almost certainly disclaimed the chimney interior entirely.

Stand at your hearth and look up: past the damper, you can see perhaps three feet of a system that may run thirty. The other ninety percent of your chimney, the flue joints, the hidden bends, the clearances to framing inside your walls, the condition of the crown two stories overhead, is completely invisible from where you live. That blind spot is exactly what a chimney inspection exists to close. Cracked tiles, open mortar joints, shifted liners, and creosote glaze do not announce themselves; they sit quietly out of sight until a hot fire or a home sale finds them. An inspection is how you find them first, on your schedule and your terms.

What the Service Includes

1Level 1 annual inspections

The Level 1 is the foundation of chimney safety and the version most homeowners need most years. We examine every readily accessible part of the system: firebox, damper, smoke chamber entrance, the visible flue, the exterior masonry from grade, and the crown, cap, and flashing when roof access is safe. We verify the flue is free of obstructions and combustible deposits and that the basic structure is sound. Performed annually, often alongside a sweep, it establishes a year-over-year record of your chimney's condition that makes any future change easy to spot.

2Level 2 video camera scans

The camera is what transforms an inspection from opinion into documentation. We run a high-resolution camera head the full length of each flue, examining every tile-to-tile joint, every offset, and every inch of liner under bright, even light. This is how you find the hairline crack three joints up, the missing mortar between tiles, the gap where a liner section shifted, or the glaze layer hiding above a bend. None of these are visible with a flashlight from the firebox, and every one of them matters to how safely your chimney contains heat and gases.

3Real estate transaction inspections

Buying or selling a home is the single most common reason for a Level 2, and the standard names property transfer explicitly. General home inspectors look at a chimney from the outside and note what they can see, then disclaim the rest, which leaves buyers inheriting flues sight unseen. We work within real estate timelines, scan every flue in the house, and deliver a photo-documented report your attorney, agent, or lender can actually use. Sellers order them too: a clean pre-listing inspection defuses the eleventh-hour chimney scare that derails so many closings.

4Post-fire and post-event evaluations

After any suspected chimney fire, lightning strike, or serious impact, the system needs a Level 2 before it is used again. Chimney fires leave signatures we know how to read: puffed or honeycombed creosote, cracked and spalled tile faces, warped dampers, and creosote flakes on the roof or ground. A nor'easter that drops a limb across your chimney or a strike that travels the stack can fracture tiles internally while the exterior looks fine. We document the damage thoroughly, which is exactly what your insurance carrier will ask for when a claim is filed.

5Appliance change and liner evaluations

Any change in how a chimney is used triggers a Level 2 under the standard, and for good reason: a flue that vented an oil boiler safely may be dangerously oversized for the high-efficiency gas unit replacing it, and a fireplace flue may be the wrong size or condition for the wood insert you want. We scan the flue, measure it, verify clearances, and tell you whether it can serve the new appliance as-is or needs a properly sized UL-listed stainless steel liner first. That answer, made before installation, prevents expensive rework after.

6Written reports with photos and priorities

Every inspection ends with a document, not a verbal shrug. Your report includes photographs and camera captures of anything notable, a description of each finding in plain language, and a priority level: safety items to address before the next fire, maintenance items to plan for, and observations that simply belong in the record. We separate what the standard requires from what is merely nice to have, and we put our name on the distinction. Customers use these reports for negotiations, insurance files, contractor bids, and year-over-year comparison at the next annual visit.

How We Diagnose and Fix It

Here is what an actual diagnostic visit looks like, so you know what to expect. The sweep starts with questions — when the symptom appears, what changed recently, how you use the fireplace — because the history narrows the possibilities before a ladder comes off the truck. Then the physical inspection: firebox, damper, and smoke chamber from below; crown, cap, flashing, and masonry from the roof; a camera scan of the flue if the situation calls for one. Photos get taken throughout. At the end, you should receive a plain-language explanation of what was found, evidence you can see yourself, and a written scope if work is recommended. The whole process typically fits inside an hour or two. What you should not get is a verdict delivered from the driveway without anyone touching the chimney.

When a flue can no longer safely contain heat and gases — cracked tiles, open joints, or no liner at all — relining is the fix, and stainless steel is the workhorse solution. The process: the flue is measured and the liner sized to the appliance it serves, because an oversized flue drafts poorly and condenses creosote. The stainless liner is lowered down the chimney, connected to the appliance or fireplace below, insulated in most cases to improve draft and meet listing requirements, and finished with a top plate and cap. Done properly, it creates a continuous, sealed, correctly sized passage from appliance to sky. Relining sounds invasive but usually takes about a day, involves no demolition in most homes, and is frequently the single most consequential safety upgrade an older Massachusetts chimney can receive.

Warning Signs to Watch For

You are buying or selling a home and the flues have never been camera-scanned.
You are converting fuels, relining, or installing a new stove, insert, or heating appliance.
You have had, or even suspect, a chimney fire, however brief.
Lightning, a fallen limb, or storm damage has struck the chimney or roofline.
You have no record of the chimney ever being professionally inspected.
White staining, rust streaks, or dark patches are spreading on the chimney masonry.
Pieces of flue tile or hardened mortar have appeared in the firebox or on the smoke shelf.
Ceilings or walls near the chimney show damp spots or peeling paint after rain.
The fireplace smell, draft, or burning behavior has noticeably changed this season.
Your home predates 1940 and the flue may be unlined or lined with deteriorating clay tile.

Why This Matters in Everett

Everett is one of the densest cities in the Commonwealth, built out almost entirely by the 1930s with triple-deckers, two-families, and closely spaced wood-frame singles. Most of these buildings carry original brick chimneys serving stacked heating appliances, and many flues have been switched from coal to oil to gas without ever being properly relined. Flat and low-pitch roofs are common, and access between buildings is tight.

Just four miles from our Melrose shop, Everett is home turf. The chimney story here is urban: aging multifamily stacks, gas-conversion liner work, and tall brick chimneys that loom over three stories of tenants who all depend on the same flue. Landlords and condo associations make up a big share of the calls in this city.

Nor'easters give chimneys in Everett a beating that ordinary storms never match. These coastal systems drive rain and snow horizontally for hours at a time, forcing water against the sides of a chimney rather than politely down onto its cap. Wind-driven rain exploits every weakness: hairline cracks in the crown, thin spots in mortar joints, and lifted flashing at the roofline all become entry points under that kind of pressure. Homeowners often discover the aftermath weeks later, as a ceiling stain near the chimney or a damp, smoky odor in the firebox. After a hard nor'easter season, a careful inspection of the crown, flashing, and masonry is not paranoia; it is how storm damage gets caught while the fix is still small.

What It Typically Costs

Chimney repair pricing varies more than sweep pricing because chimneys fail in such different ways and places. The main drivers are extent, access, and materials. Repointing a few mortar joints is a different undertaking from rebuilding a chimney from the roofline up. Work high on a steep roof may require staging that a walk-up ranch never would. And in the older neighborhoods we serve, matching brick and mortar appropriately matters, both for appearance and because modern mortar that is harder than antique brick can actually accelerate damage to the original masonry. A written estimate after an actual inspection is the only number worth trusting, and it should itemize the work plainly enough to compare against any other bid.

Why Call Upside Down Chimney Sweeps

Plenty of companies will run a brush through your flue. What sets Upside Down Chimney Sweeps apart is everything that happens around the brush. We document our inspections with photographs, so you see exactly what we see inside your smoke chamber and up your flue. We explain findings against the actual language of NFPA 211 rather than vague warnings. We give written estimates before repair work begins, not after. And because we are a local outfit based in Melrose rather than a franchise dispatching strangers, the technician in your driveway has a personal stake in doing the job right. Our business grows on referrals between neighbors, which is exactly the kind of pressure a homeowner should want a contractor to feel.

Frequently Asked Questions

What is the difference between a Level 1 and Level 2 inspection?

A Level 1 is the annual visual checkup defined by NFPA 211: we examine all readily accessible portions of the chimney and vent system, verify the flue is clear of obstruction and heavy deposits, and confirm basic soundness. It is appropriate when nothing has changed and the system has been behaving normally. A Level 2 includes all of that plus inspection of accessible attics, basements, and crawl spaces, and a video camera scan of the flue interior from end to end. The camera is the decisive difference: it sees every joint and crack that no flashlight can reach.

When is a Level 2 inspection actually required?

Per NFPA 211, a Level 2 is called for in four broad situations: when a property is sold or transferred; after an operating malfunction or an external event likely to have caused damage, such as a chimney fire, lightning strike, or building fire; when the system's use changes, including fuel conversions or relining; and when a new appliance such as a stove or insert is being connected. In practice, if anything about your chimney's history, use, or ownership is changing, the standard points to Level 2. For routine years in between, an annual Level 1 is the appropriate tool.

I already paid for a home inspection. Do I really need a chimney inspection too?

Almost certainly, and your home inspection report likely says so itself. General home inspectors evaluate chimneys visually from the outside and from the hearth, then formally disclaim the flue interior, which is where the expensive problems live. They are generalists working an entire house in a few hours; flue joints two stories up inside the masonry are simply outside their scope and equipment. Buyers in Everett routinely discover after closing that a flue needs a multi-thousand-dollar reline that a camera scan would have flagged before negotiations closed. A Level 2 before you sign is cheap insurance by comparison.

What does the camera actually show you?

Everything the flashlight cannot. The camera travels the full length of the flue under bright, even illumination, so we see each tile-to-tile mortar joint, every offset and transition, and the entire liner surface up close. Typical findings include hairline and structural cracks in tiles, missing mortar between joints, spalled tile faces from past chimney fires or freeze-thaw stress, shifted or gapped liner sections, glazed creosote hiding above bends, and obstructions like nesting material. We record the scan and capture stills, so findings become documented evidence you can act on rather than a verbal description you have to take on faith.

How much does a chimney inspection cost in the Boston area?

A standalone Level 1 typically runs $99 to $199 around Boston, and many homeowners pay less in practice because we fold Level 1 work into an annual sweep visit at a reduced combined rate. Camera-scanned Level 2 inspections generally run $249 to $549, with the main variables being the number of flues in the chimney, roof access, and the documentation depth the situation requires; a multi-flue Victorian being sold needs more scanning and reporting time than a single-flue ranch. We quote the exact figure before work begins, and there is no charge surprise at the end.

How long does an inspection take, and can you meet a real estate deadline?

A Level 1 usually takes 30 to 45 minutes. A Level 2 typically runs one to two hours depending on the number of flues and how much of the building the chimney passes through, plus report preparation afterward. We handle real estate work constantly and build our schedule around purchase-and-sale timelines, so tell us your deadline when you call (781) 653-5644 and we will be straight with you about whether we can meet it. On-site findings are shared the same day, with the formal written report following promptly so your negotiation window stays open.

What happens if you find damage?

You get documentation, a clear explanation, and options, in that order. Every finding is photographed, described in plain language, and assigned a priority: conditions that make the system unsafe to use as-is, items to plan and budget for, and minor observations for the record. If repairs are warranted, we explain the range of appropriate fixes, from joint repair to a UL-listed stainless liner, and what each accomplishes. The report is yours regardless of who does any eventual work; our job on inspection day is to tell you the truth about the chimney, not to sell you a project.

Is an inspection the same thing as a sweep?

No, though they pair naturally. A sweep physically removes soot, creosote, and debris from the flue; an inspection evaluates the condition of the system itself. You can have a freshly swept chimney with a cracked liner, and a structurally perfect chimney too dirty to use safely. NFPA 211 treats them as companions: inspect annually, clean when deposits warrant. There is also a practical sequencing benefit, since a camera scan reads a clean flue far better than a dirty one. Many households in Everett book both together each fall and cover the whole standard of care in a single visit.

Get It Handled Today

Chimney calendars around Everett fill fastest exactly when you most want an appointment, so the best time to call is before the season demands it. Whether that means a sweep before the first fire, a repair while the weather still favors masonry work, or an inspection simply because it has been more than a year, Upside Down Chimney Sweeps can get you scheduled with one call to (781) 653-5644. We will confirm the scope, give you an honest price, and show up when we said we would. The homeowners who never seem to have chimney emergencies are, almost without exception, the ones who made this call a little earlier than they strictly needed to.

Serving Everett Same-Week

Our Melrose shop is 4 miles from Everett. Call (781) 653-5644 for fast scheduling.

Call (781) 653-5644 Email Us

Mon–Sat: 7:00 AM – 7:00 PM · Emergency service available