Upside Down Chimney Sweeps logo
Call

Medway, MA · Norfolk County

Fireplace Cleaning Company Near me in Medway, MA

When repointing can no longer save a chimney, we take it down to sound masonry and build it back correctly - partial roofline-up rebuilds, full reconstructions, and historic restorations with matched brick. In the Boston market, partial rebuilds from the roofline up typically run $2,500–$7,500 and full ground-up rebuilds generally range from $8,000 to $20,000 or more, driven by height, brick selection, staging, and lining - every project is priced from a detailed written scope.

Call (781) 653-5644

Every autumn, searches for "fireplace cleaning company near me" spike across Greater Boston, and every autumn our phone at (781) 653-5644 rings with some version of the same story: the first cold night arrived, someone lit the first fire of the season, and something was clearly wrong. Chimneys have a way of announcing their problems exactly when you need them most. The good news is that most of these problems are well understood, diagnosable in a single visit, and fixable before deep winter sets in — provided you do not wait until December, when every sweep in Massachusetts is booked solid. This article from Upside Down Chimney Sweeps lays out what the issue behind your search typically is, how we confirm it, what the repair involves, and how to time the work sensibly so the fireplace is ready when the cold is.

Massachusetts homes are old — genuinely old, not real-estate-listing old. Triple-deckers from the 1890s, Victorians with three flues in one stack, postwar capes with hastily added fireplaces: each era brought its own construction habits, and many predate flue liners entirely. An unlined or deteriorated flue lets heat and gases reach parts of the house they were never meant to touch. That is why this issue deserves more attention in a Massachusetts home than the same symptom might get in a newer build elsewhere. The original masons did excellent work with the materials of their time, but no chimney was designed to go a century without attention, and most around Greater Boston have outlived their builders by decades. Understanding your chimney's era is the first step toward understanding what is going wrong with it.

Homeowners insurance shapes chimney problems in ways people rarely anticipate. Most policies distinguish sharply between sudden, accidental events — a chimney fire, storm damage from a falling limb — and gradual deterioration, which carriers classify as deferred maintenance and typically decline to cover. That distinction puts the cost of neglect squarely on the homeowner. It also makes documentation valuable: a record of annual inspections per NFPA 211 demonstrates that a failure was genuinely sudden rather than years in the making, which can matter enormously during a claim. And if a chimney-related incident does occur, the insurer's first question is usually when the system was last inspected. Handling the problem behind your search promptly, and keeping the paperwork, protects both your house and your position if you ever need to file.

Chimney Rebuilds & Restoration in Medway, MA

Most rebuilds are partial. The section above the roofline lives in a different climate than the rest of the stack - it takes wind-driven rain from every nor'easter, has no house warmth to buffer it, and cycles through freeze and thaw dozens of times each winter - so it commonly fails decades before the chimney inside the house shows any distress. A partial rebuild removes the deteriorated courses down to solid brick at or near the roofline and relays them, finishing with a cast concrete crown, fresh counter-stepped flashing, and a stainless cap. Full rebuilds, taken down to the smoke shelf or the foundation, are reserved for chimneys with deep structural movement, crushed or displaced flue tiles, or footing problems - conditions a Level 2 inspection per NFPA 211, with a camera scan of the flue, will reveal before demolition ever starts.

Upside Down Chimney Sweeps rebuilds and restores chimneys across Medway and Greater Boston from our home base at 20 Sewall Street in Melrose. We handle the full arc of the project: the inspection and documentation, the permit where your building department requires one, safe demolition with debris contained and hauled, the rebuild itself, and the crown, flashing, liner, and cap that determine how long the new masonry lasts. We will also tell you plainly when you do not need us - some chimneys marketed for rebuilds by storm-chasing outfits need only honest repointing. For a straight answer and a documented assessment, call (781) 653-5644.

Stand across the street and sight along the top of your chimney against the sky. Straight lines and crisp corners mean the stack is holding. A lean, a visible curve, a ragged silhouette, or daylight through the upper courses means the masonry above your roof has begun to let go. Every chimney reaches a point where the arithmetic flips - where the joints have eroded so far, and the brick has spalled so deeply, that repointing would mean gluing together material with nothing left to give. At that point the honest recommendation is a rebuild: take the chimney down to sound masonry and construct it again, correctly, with a modern crown and a properly sized flue. It sounds drastic. In practice, it is how a hundred-year-old chimney earns its next hundred years.

What the Service Includes

1Partial Rebuilds from the Roofline Up

The workhorse of chimney reconstruction. We dismantle the deteriorated stack down to sound, well-bonded masonry - typically at or just below the roofline - then relay it course by course, plumb and square, with mortar suited to the brick. The rebuilt section gets everything the original lacked: a sloped, overhanging cast crown with a bond break at the flue, new counter-stepped flashing, and a stainless cap. Because the failure zone above the roof is rebuilt entirely rather than patched, this is usually the most cost-effective permanent fix for a badly weathered chimney.

2Full Chimney Rebuilds

When movement, crushed flue tiles, interior mortar washout, or foundation settlement compromise the chimney through the structure, we rebuild from the base or the smoke shelf up. This is a staged, engineered project: protection inside the home, sequenced demolition through the roof and floor penetrations, and reconstruction with a new code-compliant flue path from appliance connection to termination. Full rebuilds are also the opportunity to correct old sins permanently - undersized flues, missing wall clearances, and combustible framing set tight against the masonry, all conditions NFPA 211 exists to address.

3Historic Restoration and Brick Matching

On older homes in Medway, the chimney is part of the architecture, and we rebuild it that way. Before demolition we document corbelled tops, decorative banding, and wash courses with photographs and measurements, then replicate them in the reconstruction. Brick is matched by size, color range, and surface texture - reclaimed brick where the original is no longer made - and mortar is blended to period-appropriate softness and sand color. The goal is a chimney a preservation-minded neighbor cannot pick out as new, with a century of modern service life hidden inside it.

4Flue Lining During Rebuild

A rebuild with the stack open is the cheapest moment your chimney will ever have to gain a proper liner, and we rarely rebuild without one. We install UL-listed stainless steel liners sized to the connected appliance - wood stove, fireplace, oil burner, or gas - insulated where the listing and conditions require it. Correct sizing matters as much as the metal: an oversized flue cools exhaust, kills draft, and breeds condensation and creosote. A continuous, listed liner restores the sealed path that keeps combustion gases off your framing and out of your rooms.

5Crown, Flashing, Cricket, and Cap Integration

The rebuilt masonry survives only as long as its water-shedding system, so we build that system in rather than bolting it on. The crown is cast concrete, sloped and overhanging with a drip kerf, isolated from the flue by a bond break. Flashing is two-part: step flashing woven into the shingles, counter-flashing let into the mortar joints above. On wide chimneys on the downslope side of the roof, we add a cricket to split water and sliding snow around the stack. A stainless multi-flue or single-flue cap finishes the top.

6Structural Assessment and Leaning Chimney Correction

A leaning stack is a falling hazard over your roof, your walkway, and your neighbor's driveway, and it demands diagnosis before reconstruction. We determine whether the lean comes from one-sided mortar erosion above the roof - the weather side always erodes faster - or from movement lower down, and we inspect footings and shoulder masonry before proposing scope. Where the cause is above the roofline, a partial rebuild solves it outright. Where settlement is involved, we coordinate the structural remedy first, so the new chimney is not built on the old problem.

How We Diagnose and Fix It

It is tempting to skip diagnosis and jump straight to the fix, especially when a symptom seems self-explanatory. Resist that. Chimney symptoms overlap heavily: a white haze on brick, a musty smell, and a damp firebox can each stem from three or four different causes, and each cause has a different correct repair at a very different price. Contractors who quote significant work sight-unseen are guessing — and when the guess is wrong, you pay for the repair that did not solve the problem, then pay again for the one that does. A structured inspection per NFPA 211 costs a fraction of any meaningful repair and converts the project from speculation to evidence. In chimney work, the cheapest money you will ever spend is the money that ensures you fix the right thing.

Masonry repairs succeed or fail on materials and prep, not just workmanship. Repointing — cutting out failed mortar joints and refilling them — only lasts when the new mortar matches the old in hardness; modern Portland-heavy mixes are actually too strong for older Massachusetts brick and cause the surrounding faces to spall. Crown work has its own rules: a proper crown is cast concrete with an overhang and drip edge, not a thin mortar wash troweled over the top course, and a badly failed crown gets rebuilt rather than endlessly patched. Spalled bricks are cut out and replaced individually where damage is contained. When chimney rebuild is on the table, ask the contractor what mortar type they intend to use and why — the answer tells you quickly whether you are dealing with a chimney specialist or a generalist.

Warning Signs to Watch For

  • The chimney visibly leans, curves, or no longer lines up plumb when sighted against the sky.
  • Whole bricks are loose, missing, or have fallen onto the roof or into the yard.
  • Mortar joints in the upper courses have eroded so deeply that daylight shows through the stack.
  • Previous repointing attempts keep failing because there is no sound mortar left to bond to.
  • The masonry between roofline and crown looks ragged, stepped, or shorter than it used to be.
  • Chunks of brick or clay flue tile keep appearing in the firebox or on the smoke shelf.
  • Deep spalling has eaten past brick faces into the body of the wall across large areas.
  • Diagonal or stair-step cracks run through the chimney where it passes the roof or shoulders.
  • A home or insurance inspector has flagged the chimney as unsound or recommended it not be used.
  • Water infiltration around the chimney persists even after crown, flashing, and joint repairs.

Why This Matters in Medway

Medway pairs an old village core along Village Street, with 18th- and 19th-century homes and their original chimneys, against large tracts of 1980s-2000s colonials built during the town's growth spurts. The newer homes typically carry a single family-room fireplace, often prefab, while the village stock keeps older unlined or clay-lined masonry flues.

Medway grew fast in recent decades, and many of its builder-installed prefab fireplaces from the 1990s are now reaching the age where chase covers rust and refractory panels crack. The historic Village Street corridor along the Charles calls for a different skill set: traditional masonry care on genuinely old chimneys.

The stretch of chimney above your roofline lives a harder life than any other masonry on a Medway home. It takes weather from all four sides, gets no shelter from eaves or landscaping, and endures the sharpest temperature swings on the property, warmed from within by flue gases while winter air holds the exterior far below freezing. The crown, the concrete surface sealing the top of the stack, bears the worst of it and is often built too thin in the first place. Small crown cracks admit water directly into the chimney's core, where freeze-thaw pressure spreads the damage downward out of sight. This is why a professional inspection pays so much attention to the top three feet of a chimney.

What It Typically Costs

The best defense against overpaying for chimney work is a contractor who shows their evidence, so here is what you should demand from anyone in our trade, including us. Ask to see photographs or video of the condition being repaired. Ask which part of NFPA 211 or the appliance manufacturer's requirements makes the work necessary rather than optional. Ask for a written, itemized estimate before work begins, and ask what happens to the price if hidden conditions appear. A reputable company answers all of this comfortably. Chimney work is invisible to the homeowner almost by definition, which is exactly why documentation, plain explanations, and written scope are not courtesies; they are the actual product.

Why Call Upside Down Chimney Sweeps

Good chimney work starts with good communication, and we structure every job around it. Before we begin, you get a clear scope and a clear price. During the visit, our technician explains what they are finding and photographs anything noteworthy inside the flue or up on the roof, places you would never see otherwise. Afterward, you receive a report that plainly states the condition of your chimney and any recommendations, ranked by urgency. Call our office and a person who knows your job answers, not a call center reading a script. None of this is revolutionary; it is simply how service companies used to operate, and we think Greater Boston homeowners deserve contractors who still work that way.

Frequently Asked Questions

How do I know if my chimney needs a rebuild instead of repointing?
The dividing line is whether sound material remains to repair. Repointing renews the outer portion of mortar joints, so it requires bricks that are still hard and well seated, with solid mortar deeper in the wall. When bricks shift by hand, faces have spalled deep into the units, courses are missing, or the stack leans, there is nothing structurally trustworthy left to point against - new mortar would be cosmetics over sand. A close inspection settles it: we probe the joints, scan the flue, and show you photos of exactly where sound masonry ends. When a partial rebuild is the honest call, we will show you why on your own chimney, not tell you to take our word for it.
What does a chimney rebuild cost in the Boston area?
Partial rebuilds from the roofline up typically land between $2,500 and $7,500, while full rebuilds generally run from $8,000 to $20,000 or beyond - treat those as market ranges, not quotes. The variables that move the number are height and roof pitch, how many courses come down, brick selection (reclaimed historic matches cost more than standard units), whether a stainless liner is included, staging complexity, and crown and flashing scope. Multi-flue chimneys serving both a fireplace and a heating appliance sit at the upper end. We price from a written, itemized scope after inspection, so a homeowner in Medway can see exactly what each element costs before committing to any of it.
How long does a chimney rebuild take?
A typical partial rebuild runs two to four working days: one for protection and demolition, one to two for relaying the masonry, and a final day for the crown, flashing, and cap. Full rebuilds usually take one to two weeks depending on height, interior access, and lining scope. Weather is the honest variable - mortar and crown concrete need above-freezing curing conditions, so spring through fall projects run on schedule while winter work requires tenting, heat, or a thaw window. If your chimney is unsafe right now, we can often stabilize or take down the hazardous section quickly and sequence the reconstruction for the next workable stretch.
Can you match the original brick on an older home?
In almost every case, yes, though it takes legwork. We match on four axes: brick dimensions (older brick often differs from modern standards), color range, surface texture, and hardness. For homes where the original run is long out of production, we source reclaimed brick from New England salvage suppliers, which weathers identically because it already has. During demolition we also salvage sound original brick and relay it on the street-facing sides where matching matters most. Mortar gets the same treatment - sand color and joint profile matched to the existing work. On a restoration in Medway, our benchmark is simple: from the sidewalk, the rebuilt chimney should not look rebuilt.
Will you install a liner during the rebuild?
Almost always, and we would need a good reason not to. Many chimneys old enough to need rebuilding were built with no liner at all, or with clay tiles that are now cracked and shifted - and NFPA 211 treats a sound, correctly sized flue as fundamental to safe operation. With the stack already open, installing a UL-listed stainless liner adds modest cost compared to lining a finished chimney later, and it lets us size the flue correctly for your actual appliance, which improves draft and reduces creosote condensation. Skipping the liner during a rebuild is the kind of savings that gets spent twice. If your budget forces choices, we will tell you honestly which elements can wait - the liner rarely makes that list.
Do I need a permit to rebuild a chimney in Massachusetts?
In most municipalities around Greater Boston, yes - chimney reconstruction is structural work on the building envelope, and building departments generally require a permit for rebuilds, particularly full rebuilds and anything involving the flue. Requirements and inspection points vary town by town, and we deal with these offices routinely, so we handle the filing, supply the scope documentation they want to see, and meet the inspector on site when required. The permit works in your favor: it creates an official record that the reconstruction was inspected and approved, which is exactly what a future buyer's attorney or your insurance carrier will want to see. Unpermitted structural work has a way of resurfacing at the worst possible time - usually at closing.
My chimney is leaning - is that an emergency?
Treat it as urgent until a professional tells you otherwise. A lean means the stack has lost bond somewhere, and the failure mode - bricks or whole sections coming down in wind - arrives without an appointment. Practical steps: keep people, cars, and play areas out of the fall zone, stop using any appliance venting through that flue, and get it assessed promptly. Not every lean requires a full rebuild; one-sided joint erosion above the roofline is common because the weather side of a stack always ages faster, and a partial rebuild resolves it completely. But that determination needs eyes on the masonry. Call (781) 653-5644, describe what you see, and we will prioritize the visit accordingly.
How long will a rebuilt chimney last?
Built correctly, the masonry itself should serve fifty to a hundred years - the original chimneys in this region managed that with softer materials and no crowns worth the name. Longevity comes down to three things: a real cast crown with overhang and bond break shedding water away from the stack, flashing that keeps the roofline joint dry, and mortar renewed by repointing once or twice over the chimney's life as the joints reach the end of their sacrificial service. Add an annual inspection per NFPA 211 and sweeping suited to your burning habits, and the rebuild you pay for once becomes the chimney your grandchildren inherit. The maintenance is modest; the alternative, as you now know firsthand, is not.

Get It Handled Today

What you are really buying from a chimney company is the ability to stop wondering. No more second-guessing the flue every time you light a fire, no more eyeing that stain on the ceiling near the chimney, no more resolving each October to deal with it next year. One call to Upside Down Chimney Sweeps at (781) 653-5644 settles the question for your Medway home: a professional sweep, an inspection guided by NFPA 211, photographs of everything relevant, and recommendations ranked honestly by urgency. Most chimneys pass with minor notes, and their owners sleep better for knowing it. If yours needs work, you will know exactly what and why. Either way, the wondering ends.

Serving Medway Same-Week

Our Melrose shop is 33 miles from Medway. Call (781) 653-5644 for fast scheduling.

Call (781) 653-5644Email Us

Mon–Sat: 7:00 AM – 7:00 PM · Emergency service available